Torque Pivot Point . The pivot point is at o. And different torque magnitudes will produce different rotational behaviors. Solved Exploration 2 Torque For An Object Free To Rotate from www.chegg.com Conversely, the less force applied, the less the torque will be. A uniform log that’s a hundred feet long seems pretty unlikely in the wilderness!. Figure 10.31 torque is the turning or twisting effectiveness of a force, illustrated here for door rotation on its hinges (as viewed from overhead).
Safe Torque Off Danfoss. Vlt® is a registered trademark for danfoss a/s. Safe torque off (sto), output:
What is Safe Torque Off (STO)? Library.AutomationDirect from library.automationdirect.com
Caution indicates a potentially hazardous situation which could result in minor or moderate injury. Therefore maintenance work on electrical parts of the drive or the motor can only be carried out after isolating the drive system from the main supply. Vlt® mcb140 safe option extends the safe torque off feature of vlt® frequency converters with additional safety functions.
Safe Torque Off Må Ikke Anvendes Til At Styre Start/ Standsning Af Frekvensomformeren.
It is not recommended to stop the drive by using the safe torque off function. 1.2 additional resources this manual is targeted at users already familiar with the vlt® frequency converters. It is not necessary to monitor standstill.
• Safe Torque Off Er Egnet Til At Udføre Mekanisk Arbejde På Frekvensomformersystemet Eller Udelukkende På Det Påvirkede Område Af En Maskine.
This is done through the vfd’s hardware to ensure fault tolerance. The safe torque off function does not disconnect the voltage of the main and auxiliary circuits from the drive. Sto prevents the unit from generating the power required to rotate the motor.
What Is Safe Torque Off?
It may also be used to alert against unsafe practices. Before integrating and using sto in Danfoss 130b3290 safety options vlt safe option mcb 151, coated for danfoss fc 301, fc 302 vfd lines.
Can, Standard Firmware, Safe Torque Off, 115 Mm, Isd Flange, Motor 1000 Rpm, Without Brake,.
Safe stop 1 function makes it is possible to perform a controlled stop before removing torque. Danfoss vlt fc302 filtered by power: These are safe stop 1 (ss1), safely limited speed (sls), safe maximum speed (sms) and safe speed monitor (ssm).
The Speed Of The Driven Equipment Will Drop At A Rate Determined By The System Friction And Inertia Until Standstill Is Achieved.
Most component failures are revealed by the variable frequency drive failing to operate. Warning indicates a potentially hazardous situation which could result in death or serious injury. Det giver ikke elektrisk sikkerhed.
Comments
Post a Comment